Veiligheid en Beveiliging/Camera's/Buitencamera's

SmartLife Camera voor Buiten

Wi-Fi | Full HD 1080p | Pan tilt | IP65 | Cloud Opslag (optioneel) / Intern 16 GB | 12 V DC | Met bewegingssensor | Nachtzicht | Wit

Kenmerken

Artikelcode fabrikant: WIFICO20CWT
EAN-nummer: 5412810290062
• Smart Outdoor IP-camera - biedt een eenvoudig te installeren, draadloos aangesloten veiligheidssysteem voor de buitenkant van een huis.
• Full HD-resolutie - voor kristalheldere beelden
• Eenvoudig aan te sluiten direct op uw Wi-Fi-netwerk - geen aparte hub vereist
• Geleverd met een camerabevestiging
• Volledig ondersteund door alle andere producten in het Nedis® SmartLife-assortiment.
Huisautomatisering is een stuk eenvoudiger geworden. Deze eenvoudig te gebruiken Smart Outdoor IP-camera kan gemakkelijk worden aangesloten op uw bestaande Wi-Fi-netwerk om de buitenruimtes van uw huis te bewaken en ieder geluid of iedere beweging te registreren.

Full HD-resolutie
De camera neemt op in Full HD-resolutie (1920x1080 pixels) voor compleet heldere beelden. Daarnaast is de camera 's nachts net zo krachtig: de nachtzichtmodus heeft een bereik van 15 meter.

Waterbestendig
Deze IP-camera, volledig opgenomen in een zeer robuuste waterbestendige behuizing, heeft een royaal intern geheugen van 16 GB.

Kristalhelder
De camera registreert Full HD-video’s en beelden van 1920x1080 pixels door middel van de 1/3-inch MOS-sensor voor een kristalheldere resolutie en wordt geactiveerd wanneer geluiden of bewegingen worden gedetecteerd.

Tweerichtingscommunicatie
Communiceren via de camera is mogelijk, aangezien spreken en luisteren in twee richtingen is ingeschakeld - dat wil zeggen dat hij net als een telefoon kan worden gebruikt wanneer mensen binnen bereik zijn.

Eenvoudige installatie
Bij de eenheid wordt een camerabevestiging geleverd en de snelle startgids zorgt ervoor dat het monteren in een handomdraai is gebeurd.

Over Nedis SmartLife
Ontdek een breed en continu groeiend assortiment producten, zoals gloeilampen, schakelaars, contactdozen, sensoren en camera’s, die allemaal kunnen worden bediend met een eenvoudig te gebruiken en intuïtieve app.
Of u nu op zoek bent naar één slimme gloeilamp of contactdoos, of uw hele woning wilt automatiseren, ontdek hoe toegankelijk smart technologie tegenwoordig is.

Verpakking

Inhoud verpakking

IP camera
Power adapter
Camera mount
Adhesive pad
Quick start guide

Verpakkingsafmetingen Cadeaubox met eurolock

Breedte Hoogte Lengte
95 mm 95 mm 195 mm

Logistieke afmetingen

Verpakt per Breedte Hoogte Lengte Gewicht
1 95 mm 100 mm 195 mm 458 g
20 215 mm 480 mm 400 mm 9720 g

Productspecificaties

Breedte 75 mm
Hoogte 105 mm
Diepte 75 mm
Gewicht 350 g
Kleur Wit
Ingebouwde microfoon Ja
Ingangsstroom 1.0 A
Materiaal Kunststof
Functionaliteit voor cloud opslag Ja
Geïntegreerde luidsprekers Ja
Geschikt voor Nedis® SmartLife
Kijkhoek 110 °
Beeld Chip 1/3" CMOS
LED 1
Accessoires Camerabevestiging
AC-Adapter EU-Stekker
IP-codering IP65
Kabellengte voedingsadapter 1.50 m
Maximaal zendvermogen 15 dBm
Nachtzicht 15 m
Maximale antenne versterking 3 dBi
Infrarood nachtzicht Ja
Lens 2.8 mm
Frames per seconde 25 fps
Type opslag Intern 16 GB
Cloud Opslag (optioneel)
Apparaat stroominput DC 5,5 x 2,1 mm
Maximale stroomverbruik 12 W
Maximale resolutie Full HD 1080p
Hellingshoek 85 °
Megapixels 2 MPixel
Aantal draai graden 355 °
Vormgeving camera PTZ-Camera
Stroom over Ethernet ondersteuning Nee
Fisheye Nee
Met bewegingssensor Ja
App beschikbaar voor Android™
IOS
Zendfrequentie 2400 - 2483.5 MHz
Ingangsvoltage 12 V DC
Type stroombron Netvoeding
Pan tilt Ja
Dimbaar Ja
Ondersteunde draadloze technologie Wi-Fi
Programmeerbaar Ja
Bedrijfstemperatuurbereik -20 - 50 °C
Aantal producten in verpakking 1 Stuks
Stekkertype Type C (CEE 7/16)

Ondersteuning

Veelgestelde vragen

Nee, dit apparaat is niet compatible met Google/NEST Home hub.
De beelden zijn op dit moment niet te streamen naar een Google/NEST Hub.

Een automatisering kan worden gebruikt om een bepaalt "gebeurtenis" (condition), als een trigger te gebruiken voor een aktie (Task).
Een gebeurtenis kan van alles zijn zoals Bewegings detectie, tijd, temperatuur, zonsopkomst ect.
Zo kunt u een automatisering maken dat als de zon ondergaat de lampen aangaan, u de Smartplugs aanzet of een combinatie van verschillende akties.

Nee, dit is op het moment nog niet mogelijk.

Ja dat is mogelijk.

Ieder persoon dient een account aan te maken in de SmartLife app.
Om deze personen toe te voegen als familie volg dan onderstaande stappen:

Klik linksboven op de naam van uw huis in het hoofdscherm.
Selecteer beheer huis, klik opnieuw op de naam van uw huis.
Hier ziet u uw instellingen van uw huis zoals aantal kamers, lokatie ect.
Klik hier daaronder onder de kop Familieleden op "Leden toevoegen".
Dit geeft de persoon toegang tot al uw SmartLife producten.

Wilt u een persoon alleen toegang geven tot 1 bepaald product, ga naar instellingen van het bepaalde product en selecteer "Apparaat delen" klik op toevoegen.

Dit is waarschijnlijk een wifi probleem die verschillende oorzaken kan hebben:

1.) Wifi signaal is instabiel
2.) Wifi signaal is te zwak
3.) Using an access point with the same SSID and Password that do not support IEEE802.11R standaard.

Probleem 1 kan vaak opgelost worden door uw router te herstarten.

Probleem 2 kan worden opgelost door een met een app Wifi analyzer uw signaal te controleren en eventueel om van kanaal op uw router in te stellen.

Probleem 3 Dit kunt u controleren door acces points en versterkers uit te schakelen. Als de producten dan weer online komen dan zijn de acces points en versterkers een probleem. We raden u dan aan om een Mesh systeem te gebruiken die de IEE802.11R ondersteunen (wifi6)

Wij hebben voor u de volgende vragen gevonden in het Engels

The record function in the app is used to save the recording of the camera at your phone.
So you can store an event manually at your phone.

You go to play in the app, here you see the time line. Select the time that an event accursed, click on record and again at record and the recording will be saved at your phone.

It is not possible to extend the internal memory by an SD-Card.
You can extend the recordings with the cloud storage.

See for instructions the FAQ "Does the camera support cloud storage?"

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

24 hours of recording takes up about 6.5GB on the memory.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

You can add maximum 20 members.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.