Videocitofono SmartLife
Wi-Fi | Alimentazione a batteria | Full HD 1080p | Cloud Storage (opzionale) / microSD (non inclusa) | IP54 | Con sensore di movimento | Visione notturna | Grigio
Funzioni
• Alimentazione a batteria per una soluzione wireless al 100%. Il rilevamento di movimento può anche essere disattivato (ad esempio, se la tua porta si affaccia direttamente sulla strada)
• Comunicazione bidirezionale per parlare ai tuoi visitatori ovunque ti trovi
• Registrazioni Full HD (1080p) e zoom digitale sullo smartphone per una visualizzazione dettagliata
• Le registrazioni vengono memorizzate su una scheda MicroSD fino a 128 GB (non incl.) per consentirti di rivedere cosa è successo
• Integrato nell'app Nedis® SmartLife
• Espandibile con segnale acustico per porta wireless (WIFICDPC10BK, non incl.), così potrai sentire il campanello quando sei a casa, indipendentemente da dove si trova il tuo telefono
Dato che puoi rispondere da qualsiasi posizione nel mondo a condizione che lo smartphone disponga di una connessione a Internet, ciò aumenta anche la sicurezza domestica, facendo sembrare che tu sia a casa.
La videocamera Full HD (1080p) è dotata di un angolo di visualizzazione a 180° e supporta la visione notturna, consentendoti di vedere chiaramente chi è alla tua porta 24 ore al giorno.
Nessun problema se non hai il tempo di rispondere alla porta. Le immagini vengono memorizzate su una scheda microSD per consentirti di guardare in qualsiasi momento.
Questo videocitofono wireless al 100% è facile da installare poiché è alimentato a batteria e quindi non richiede alcuna connessione, tranne quella Wi-Fi.
Espandi questo videocitofono con il campanello Nedis (WIFICDPC10BK) per sentire il segnale acustico anche se lo smartphone è spento.
Imballaggio
Contenuto della confezione
Videocitofono
Supporto a parete
cavo USB
Materiali di installazione
Guida di avvio rapido
Dimensioni e peso del prodotto Scatola regalo con eurolock
Larghezza | Altezza | Lunghezza |
---|---|---|
162 mm | 95 mm | 100 mm |
Dimensioni e peso della confezione
Confezioni da | Larghezza | Altezza | Lunghezza | Peso |
---|---|---|---|---|
1 | 105 mm | 120 mm | 165 mm | 377 g |
10 | 335 mm | 120 mm | 495 mm | 4100 g |
20 | 355 mm | 265 mm | 510 mm | 8860 g |
Specifiche del prodotto
Larghezza |
50 mm |
Altezza |
141 mm |
Profondità |
33 mm |
Peso |
225 g |
Collegamento / i di ingresso dell'alimentazione del dispositivo |
Micro USB |
Corrente di ingresso |
1.0 A |
Tipo di alimentazione |
Alimentazione a batteria |
Cavo di alimentazione lato B |
Micro USB |
Cavo di alimentazione lato A |
USB |
Colore |
Grigio |
Materiali |
Plastica |
Funzionalità di registrazione cloud |
Sì |
Visione notturna |
5 m |
Compatibile con |
Nedis® SmartLife |
LED |
1 |
Tensione d'entrata |
5 V DC |
Guadagno massimo dell'antenna di trasmissione |
2 dBi |
Risoluzione massima |
Full HD 1080p |
Con sensore di movimento |
Sì |
Accessori |
Materiale di installazione |
Batterie richieste (incluse) |
2x 18650 |
App disponibile per |
Android™ IOS |
Chip immagine |
1/2.9” CMOS |
Trasmissione gamma di frequenza |
2412 - 2472 MHz |
Assorbimento massimo |
2 W |
Capacità della batteria |
5200 mAh |
Tipo di archiviazione |
microSD (non inclusa) Cloud Storage (opzionale) |
Massima potenza di trasmissione |
13 dBm |
Protezione ingresso |
IP54 |
Angolo di osservazione |
180 ° |
Lente |
1.4 mm |
Tecnologia wireless supportata |
Wi-Fi |
Intervallo operativo di temperatura |
-20 - 50 °C |
Numero di prodotti nel pacco |
1 pz. |
Mas. durata della batteria |
4 mesi |
Numero di melodie |
1 Melodia |
Supporto
Domande frequenti
Abbiamo trovato le seguenti domande per te in inglese
How do I pair the gong to the WIFICDP20xx doorbell?
1. Place the gong as close to the doorbell as possible during the installation.
2. Press and hold the button on the chime for 5 seconds , led on the chime flashes.
3. Shortly press chime reset button. The led will start blinking slowly.
4. Hold doorbell button until the Led on the chime stops flashing
5. Push the doorbell button to test it
6. Relocate the chime to the desired location
7. Push doorbell again to test the range
Can I adjust the volume and tone of the WIFICDPC10BK wireless chime?
Unfortunately this battery powered doorbell does not have this option.
The wired WIFICDP10GY doorbell does allow you to change the tone and volume.
I can't find the doorbell settings menu to pair the gong.
Unfortunately the manual that comes with the doorbell is incorrect.
We were too late to change it when we found out but we did add a small extra manual on how to pair the gong.
Move the gong as close to the doorbell as possible.
Give the gong's button a short press: the LED starts to blink
Now press and hold the doorbell's button until the LED on the gong stops blinking and it is paired.
It is not possible to change the tone and volume on this doorbell model.
Can I use a really fast ultra/extreme/Evo/pro/canvas memory card in this device?
These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.
The camera does not recognise the QR code
Please try the EZ mode installation
Reset the camera by holding down the reset button until you hear the sound
Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.
Does it work with Google Home (HUB)?
No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.