Turvallisuus ja valvonta/Ovikellot/Video -ovikellot

SmartLife Video Ovipuhelin

Wi-Fi | Paristokäyttöinen | Full HD 1080p | MicroSD (ei sisälly) / Pilvipalvelutallennus (valinnainen) | IP54 | Liiketunnistimella | Yökuvaus | Harmaa

Ominaisuudet

Valmistajan koodi: WIFICDP20GY
EAN: 5412810330287
• Lähettää push-ilmoituksia älypuhelimeesi, jos joku lähestyy ovea (PIR-liikeilmaisin) tai soittaa ovikelloa
• Paristokäyttöinen - täysin langaton ratkaisu• Liikkeentunnistuksen voi poistaa käytöstä (esimerkiksi silloin, kun ovi on kadun puolella)
• Kaksisuuntainen viestintä vieraiden kanssa mistä tahansa käsin
• Full HD -tallennus (1080p) ja älypuhelimesta käytettävä digitaalizoomi lähempää tarkastelua varten
• Tallenteet tallentuvat MicroSD-kortille, jonka koko on enintään 128 Gt (ei sisälly pakkaukseen) - voit katsoa tapahtumia myöhemmin
• Yhteydessä Nedis® SmartLife -sovellukseen
• Ovisilmäkameraan voi yhdistää langattoman ovikellon (WIFICDPC10BK - ei sisälly toimitukseen). Sen avulla kuulet ovikellon ollessasi kotona, vaikka puhelin ei olisikaan lähellä
Älykkään Nedis SmartLife -ovisilmäkameran avulla tiedät aina, kun joku on ovellasi, riippumatta siitä, missä olet. Kun vieras soittaa ovikelloa tai tarkka PIR-liikeilmaisin havaitsee hänen lähestyvän ovea, saat push-ilmoituksen älypuhelimeesi. Voit aloittaa videopuhelun ja pyytää postinjakajaa jättämään pakettisi naapurille tai kertomaan ovea avaamatta kaupustelijalle, ettet ole kiinnostunut hänen tuotteistaan.

Voit vastata mistä tahansa käsin, kunhan älypuhelimesi internetyhteys on käytössä. Kodin turvallisuus paranee, koska vaikuttaa siltä, että olet kotona.
Full HD -kameran (1080p) katselukulma on 180°, ja sillä voi kuvata pimeässä. Näet siis selvästi, kuka on ovella, vuorokaudenajasta riippumatta.

Ei haittaa, vaikka et olisi tavoitettavissa. Kuvat tallentuvat microSD-kortille, joten voit katsoa niitä silloin kun haluat.

Tämä täysin langaton ovisilmäkamera on paristokäyttöinen ja siten helppo asentaa, koska Wi-Fi-yhteyden lisäksi muuta ei tarvita.
Yhdistä ovisilmäkameraan Nedis-ovikello (WIFICDPC10BK), jotta kuulet, kun ovikello soi, vaikka älypuhelimesi olisi sammutettu.

Pakkaus

Pakkaussisältö

Ovisilmäkamera
Seinäkiinnike
USB-kaapeli
Asennustarvikkeet
Pika-aloitusopas

Jälleenmyyntipakkauksen mitat Lahjapakkaus lukituksella

Leveys Korkeus Pituus
162 mm 95 mm 100 mm

Logistiset mitat

Pakattu per Leveys Korkeus Pituus Paino
1 105 mm 120 mm 165 mm 377 g
10 335 mm 120 mm 495 mm 4100 g
20 355 mm 265 mm 510 mm 8860 g

Tuotteen tekniset tiedot

Leveys 50 mm
Korkeus 141 mm
Syvyys 33 mm
Paino 225 g
Väri Harmaa
Laitteen tulovirran liittimet Micro USB
Tulovirta 1.0 A
Virtalähteen tyyppi Paristokäyttöinen
Virtakaapelin pää B Micro USB
Virtakaapelin pää A USB
Materiaali Muovi
Pilvipalvelutallennus mahdollisuus Kyllä
Yökuvaus 5 m
Sopii käytettäväksi Nedis® SmartLife
LED 1
Tulojännite 5 V DC
Maksimi lähetysantennin vahvistus 2 dBi
Maksimi kuvantarkkuus Full HD 1080p
Liiketunnistimella Kyllä
Tarvikkeet Asennusmateriaali
Vaatii paristot (sisältyvät) 2x 18650
Sovellus saatavana kohteeseen Android™
IOS
Kuvapiiri 1/2.9” CMOS
Lähetystaajuuden alue 2412 - 2472 MHz
Maksimi virrankulutus 2 W
Akun kapasiteetti 5200 mAh
Tallennustyyppi MicroSD (ei sisälly)
Pilvipalvelutallennus (valinnainen)
Maksimi lähetysteho 13 dBm
IP suojaluokitus IP54
Katselukulma 180 °
Linssi 1.4 mm
Pakkauksessa olevien tuotteiden määrä 1 kpl
Tuettu langaton tekniikka Wi-Fi
Toimintalämpötila-alue -20 - 50 °C
Maks. akunkesto 4 kuukautta
Melodioiden määrä 1 Melodia

Tuki

Usein kysytyt kysymykset

Olemme löytäneet seuraavat kysymykset englanniksi

1. Place the gong as close to the doorbell as possible during the installation.
2. Press and hold the button on the chime for 5 seconds , led on the chime flashes.
3. Shortly press chime reset button. The led will start blinking slowly.
4. Hold doorbell button until the Led on the chime stops flashing
5. Push the doorbell button to test it
6. Relocate the chime to the desired location
7. Push doorbell again to test the range

Unfortunately this battery powered doorbell does not have this option.
The wired WIFICDP10GY doorbell does allow you to change the tone and volume.

Unfortunately the manual that comes with the doorbell is incorrect.
We were too late to change it when we found out but we did add a small extra manual on how to pair the gong.

Move the gong as close to the doorbell as possible.
Give the gong's button a short press: the LED starts to blink
Now press and hold the doorbell's button until the LED on the gong stops blinking and it is paired.

It is not possible to change the tone and volume on this doorbell model.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.