Cables and Adapters/Computer and Network/Zigbee Gateway

SmartLife Gateway

Zigbee 3.0 | 50 Devices | Mains Powered | Android™ / IOS | White

Features

Vendor Part Number: WIFIZB10CWT
EAN number: 5412810327898
• Plug-in design for maximum ease of use
• Connect up to 50 Zigbee products to a single gateway
• Zigbee supports instant communication with minimal battery usage
• Integrate this gateway into the SmartLife app to combine Nedis® Zigbee products to any SmartLife product
This gateway connects directly to your Wi-Fi, so no ethernet cable is required. Simply install it into your Nedis SmartLife application and you can connect up to 50 Nedis Zigbee products from a single gateway.
Each connected product will appear in the SmartLife application and can be included in automations as if it is directly connected to Wi-Fi.
Zigbee is an alternative protocol to Wi-Fi that offers a significantly lower power consumption. This enables small wireless sensors to remain functional up to multiple years on a single battery.

Packaging

Package contents

Zigbee gateway
Instruction manual

Retail package dimensions Giftbox with eurolock

Width Height Length
60 mm 125 mm 105 mm

Logistic dimensions

Packed per Width Height Length Weight
1 60 mm 155 mm 110 mm 108 g
40 340 mm 300 mm 440 mm 5040 g

Product specifications

Width 41 mm
Height 56 mm
Depth 56 mm
Weight 53 g
Colour White
Power source type Mains Powered
Material Plastic
Compatible with Nedis® SmartLife
Maximum transmit antenna gain 1 dBi
Maximum transmit power 18 dBm
App available for Android™
IOS
Transmit frequency range 2400 - 2484 MHz
Device power input connection(s) Euro
Input voltage 100 - 240 V AC
Number of Products in Package 1 pcs
Operating temperature range -10 - 50 °C
Input current 0.01 A
Number of devices 50 Devices
Supported wireless technology Zigbee 3.0
SmartLife Yes

Support

Frequently asked questions

It has a range up to 30 meters. (open field, no other signals)
The actual range in your home depends on walls, objects and other wireless signals present.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.