SmartLife Røgalarm
Wi-Fi | Varmesensor | Batteri | Sensorlevetid: 10 År | EN 14604 | Maks. batteritid: 24 Måned | 85 dB | Hvid | 1 stk.
Funktioner
• Nem tilslutning til dit Wi-Fi - så du får beskeder til din telefon
• Høj alarm - for at advare andre i og omkring huset om fare
• Kan parres med andre SmartLife-produkter - f.eks. for at tænde lys, når alarmen lyder
Denne røg- og varmealarm er nem at montere og forbindes ganske enkelt til dit Wi-Fi uden behov for en hub.
Den giver ro i sindet med to sikkerhedsfunktioner, der registrerer både røg og hurtige temperaturstigninger.
Den kan nemt parres med andre SmartLife-produkter, så du kan få ekstra sikkerhedsfunktioner. Det kan bl.a. være, at dine smart-lyspærer tændes, når der registreres røg, så det er sikkert at komme ud.
Om Nedis SmartLife
Oplev et stort og stadigt voksende udvalg af produkter - som f.eks. pærer, kontakter, fatninger, sensorer og kameraer - der alle kan styres via en brugervenlig og intuitiv app. Med stemmestyringsfunktioner understøttet af Amazon Alexa og Google Home, hvor der er ikke behov for andet end dit eksisterende Wi-Fi-netværk, er dette det forbundne, intelligente hjem på den nemme måde. Uanset om du er på udkig efter en enkelt intelligent pære eller fatning, eller du vil automatisere hele huset, kan du her opleve, hvor tilgængelig intelligent teknologi er i dag.
Emballage
Pakkens indhold
Røgalarm
Installationsmaterialer
Lynvejledning
Detail mål på pakker Gaveæske med eurolock
Bredde | Højde | Længde |
---|---|---|
125 mm | 125 mm | 50 mm |
Logistik dimensionerne
Pakket per | Bredde | Højde | Længde | Vægt |
---|---|---|---|---|
1 | 50 mm | 155 mm | 130 mm | 234 g |
10 | 270 mm | 145 mm | 270 mm | 2480 g |
40 | 295 mm | 315 mm | 555 mm | 10520 g |
Produktspecifikationer
Bredde |
120 mm |
Højde |
36 mm |
Dybde |
120 mm |
Vægt |
160 g |
Farve |
Hvid |
Indgangsstrøm |
1.0 A |
Strømkilde type |
Batteri |
Materiale |
Plastik |
Lyd |
85 dB |
Med testknap |
Ja |
Sensorlevetid |
10 År |
Med pause-knap |
Ja |
Kompatibel med |
Nedis® SmartLife |
Maksimal transmissionsantenneforstærkning |
2 dBi |
Energi fra batteritype |
AA |
Indgangsspænding |
3 V DC |
Maksimalt strømforbrug |
3 W |
Maksimal transmissionseffekt |
17 dBm |
App tilgængelig til |
Android™ IOS |
Diameter |
120 mm |
Understøttet trådløs teknologi |
Wi-Fi |
Frekvensområde |
2412 - 2484 MHz |
Antal produkter i pakken |
1 stk. |
Kontrol via mobilapp |
Ja |
Levetid i år |
2 År |
EN-overensstemmelse |
EN 14604 |
Maks. batteritid |
24 måned |
Nødvendige batterier (inkluderet) |
2x AA/LR6 |
Varmesensor |
Ja |
Driftstemperaturområde |
5 - 37 °C |
Support
Ofte stillede spørgsmål
Vi har fundet følgende spørgsmål til dig på engelsk
Can I make a setting that all installed Smart Smoke alarms give alarm when 1 unit is in alarm mode?
No, this is not possible.
The smoke alarm is in standby (off-line) mode in the app, when not triggered.
If you want to hear for example, the smoke detector alarm upstairs you can use the Wi-FI Smart Siren WIFISI10CWT.
When i push the test button, I receive no notification.
Please hold the test button between the 5 - 10 seconds.
If you want to test the smoke alarm if the sensor is working.
We recommend you to use a smoke detector test spray.
I want to receive notifications from my detector.
create an automation for this:
Tap scenario > + > when the device status changes > select the device > select all the options
Send notification > receive > on > on
Save.
My device does not show up in Google Home.
This device is not compatible with Google Home.
If one detector sounds the alarm, will it trigger other detectors?
No, these detectors are not linked like that.
They are not connected to your wifi all the time.
They are in a sort of sleep mode until they measure smoke and/or heat
If this happens, they wake up, connect to your wifi and send a signal to the server which sends a notification to your phone.
Because they are not connected constantly, you can't send a signal to the detector and activate it.
You can use automations to activate sirens, lights and smart plugs for example.
Smoke detectors are showing battery low. I have changed the battery, but it still shows battery low.
push the test button, so the smoke detector will go online. Now the battery indicator will be updated.
What is an automation?
An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.
Maximum number of members that can be added to a family.
You can add maximum 20 members.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.